What Is Deck Cleaner Used For?
Bleach can damage a deck by whitening it unnaturally, and it can also corrode metal elements on the surface. Look for a cleaner that uses oxygen bleach to fight mildew spores, instead.
Apply this product to a wet surface, saturate it and let it sit for the recommended time frame. Then rinse it off with a water hose.
Star Brite Deck Cleaner
Starbrite Non Skid Deck Cleaner 085932PW removes ground-in dirt and stains from textured fiberglass or painted decks. It is safe and easy to use, containing no phosphates or harsh chemicals, and it will not strip polish or wax. This powerful cleaner foams away stains with minimal scrubbing, leaving behind protective PTEF polymers that help repel future spills and damaging UV rays. It is also effective on all fiberglass, vinyl, plastic and metal surfaces.
Squirt Non Skid Deck Cleaner onto surface to be cleaned and allow to sit for 2-3 minutes. Scrub treated area with deck brush and rinse thoroughly. Extremely dirty surfaces may require a second application. California Prop 65 Warning: This product contains one 32 oz. bottle of Non Skid Deck Cleaner.
Harris Vinegar All-Purpose Cleaner Concentrate
Harris 30% vinegar is an all-purpose cleaning product that can be used indoors or out. It removes rust, odors, grease, soap scum, and hard water stains and works to lower the pH of soil and water. This concentrated solution is safe to use around children and pets when applied as directed. PF Harris 30% Vinegar is easy to apply with a handheld pump sprayer, garden sprayer, mop or bucket. Before using, test an area to ensure there is no adverse reaction and always wear personal protective equipment as needed. A 32 oz container will treat 1,000 sq. ft. of surface.
Star Brite Deck Stain Remover
Star Brite Deck Stain Remover is a safe, effective cleaner for fiberglass surfaces. It uses special chelating agents to loosen dirt, grease and oil, eliminating the need for heavy scrubbing. The cleaner also provides a protective coating that helps repel future staining. The product can be used on textured or non-skid surfaces, as well as painted fiberglass. Before using, wet deck surface with fresh water and apply cleaner. Allow the product to sit for a few minutes before scrubbing. Rinse thoroughly and allow cleaned area to dry completely. To protect against future stains, use a coat of non-skid deck wax after cleaning. The wax contains UV inhibitors and adds a shine that resists weathering. It’s perfect for textured fiberglass, as well as vinyl, plastic and metal.
Stain Guard Concrete Stain Remover
Stain Guard Concrete Stain Remover is a non-acidic, non-staining chemical cleaner. This solvent is specially formulated to clean mortar smears and common construction soiling from brick, natural stone, manufactured stone and concrete without damaging the substrate.
It dissolves a variety of floor waxes, acrylics, cure and seal coatings, leaving the concrete surface free of old coatings that block treatments from penetrating and can clog the heads of grinding and polishing equipment. It is also effective in removing oil, grease and other contaminates from the surface of concrete.
Gray-Out is a dry concrete cleaning powder that you spread over embedded oil stains with a broom head applicator. The activated enzymes immediately begin to break down the oil stains. No water is used at any time during this process. After a 5-8 hour dwell, simply sweep up the dried poultice and its absorbed contaminants for easy disposal.
Deck-O-Wash
This product is specifically designed for use with a pressure washer, and it can power away mildew, mold, algae and grease. It’s a good option for vinyl decks that aren’t stained, but it’s also useful for wood and concrete decks.
It’s a powdered oxygen bleach cleaner that mixes with water to create a cleaning solution. It’s safe for the environment and is appropriate for use on wood, composite, vinyl, metal and wicker outdoor furniture. Be sure to follow the manufacturer’s instructions for mixing and dilution ratios, as well as wear rubber gloves and eye protection. One gallon of this cleaner can clean up to 250 square feet of surface area. After it’s been applied, it’ll leave behind a protective barrier that prevents water stains and promotes the longevity of your deck stain.